Please note, we are closed now for ouR summer break. Checkout will open again at the end of August.

Digital negatives for the cyanotype process

Tuesday, 24th February 2015

There are two types of cyanotype prints, the first one is called a photogram, when simply objects and shapes are placed directly onto the coated paper which is then exposed to uv light. In this method there is no need for a camera or transparency film.

The second type of cyanotype is when you create a cyanotype print from a digital negative using transparency film. This method is the one that the rest of this article will cover.

To create a cyanotype print from a digital negative you will need an image manipulation software. There are many free programmes available, some work better than others, but they all have many how to turorials on YouTube. Here are a few: Gimp, Inkscape, Lightzone. We used Gimp for this tutorial, it is a free programme and can be downloaded here.


(Click on images to enlarge)

  • 1. Open your digital photograph in gimp by clicking File → Open



  • 2. Desaturate your image, this will make it black and white. Colors → Desaturate



  • 3. Invert it, this will make it into a negative. Colors → Invert



  • 4. Adjust the tones. The tonal range of a cyanotype print is limited, if you would just print the image as it is now, you would loose detail in the shadow and highlight areas. Also you have to darken your negative considerably to get a good result. We find that applying a curve shaped as on the picture below works best. There are several tutorials on the internet how to arrive to your perfect curve specific for your printer, light source, exposure time and transparencies used, there are several tutorials on this website on how to do this. Start with a curve similar to ours and then fine tune it to what works for you. Open your curves panerl by clicking Colors → Curves



  • 5. Flip your image horizontally, because you will place the printed transparency facing ink down on your coated paper for better contact. Tools → Transform Tools → Flip



  • 6. Now that your digital negative is ready,you can save it and print it on a transparency film. We use an Epson printer on the highest quality setting, and Epson premium glossy paper type. You might have to research what the best settings are for your printer and printing dark transparencies.
  • 7. Once your transparency printed and dried, you will need to place it print side down on your coated paper to ensure best contact. Exposing should be done with a consistent light source like a UV lamp. See our other tutorial from before about establishing exposure the right exposure time.

  • And here is the end result (we used our hobby uv lamp for exposure):